What is the Netgear Switch Discovery Tool? How to Use It?
The Netgear Switch Discovery Tool (NSDT), sometimes known as the Netgear Discovery Tool, is an operating system tool that facilitates switch configuration management on a PC. As an alternative, you can access the switch’s interface by using the IP address 192.168.0.239. However, not all Netgear switches are compatible with this IP address. Then it’s a good idea to use the Netgear Discovery Tool. This tool is available for:
- Windows
- Mac
- Linux
How do I download the Netgear Discovery Tool?
You can get the Switch Discovery Tool from the Netgear Get Center. The application is available in more recent versions for each of the aforementioned operating systems.
Both NSDP (Netgear Switch Discovery Protocol) and UPnP are supported by these Netgear Switch Discovery Tool (NSDT) versions. Even if your Netgear PoE switch isn’t working, you can still use this tool to troubleshoot.
The networking protocol set known as UPnP, or Universal Plug and Play, enables devices on a network to locate and connect with one another. Nevertheless, only switches on the same subnet will be found by the Linux and macOS versions of the utility.
How to Find a Switch using the Netgear Switch Discovery Tool
These are the steps you should take to use the Netgear Discovery Tool to locate a switch. We have chosen to use a Netgear Web Managed Plus switch as an example.
First, get the Netgear Switch Discovery Tool downloaded. For this:
- On the official Netgear website, navigate to the Netgear Switch Discovery Tool and choose Downloads.
- Click Download after expanding the section according to your computer’s operating system.
- Your computer will download the NSDT utility.
- The file should be unzipped.
Launch the Netgear Discovery Tool at this point:
- Select a connection from the menu.
- Choose the network connection that is connected to the switch.
- Click “Start Searching.”
- The switches that were found will be listed.
- Choose your switch and control it.
Here’s how to use NSDT to locate a switch. In the unlikely event that the tool is unable to identify the switch, you should use the troubleshooting methods described in the next section.
Troubleshooting: Unable to Locate Switch Using Netgear Switch Discovery Tool
- Verify that both your computer and the switch are within the same broadcast domain.
- Try making a direct connection between your PC and the switch. Additionally, you must make sure the cable is in good condition.
- Turn off your computer’s firewall and security software, then see if NSDT detects the switch.
- Turn off your computer’s wireless connection for the time being.
- Turn the switch back on.
- Try resetting your Netgear switch to factory defaults. To do this, look for the recessed “factory default” or “factory defaults” button. The Reset button is not the same as this. To restart your switch, press the Reset button.
Conclusion
The Netgear Switch Discovery utility is easy to download and install. It is our hope that after following the post’s instructions, you will be able to locate the switch using NSDT and handle it with ease.